Click image to view full size image
plastic machine
Runner: hot/cold
Cavity:single/multi
Standard Component :DME,HASCO,JIS etc.
Mould Life: 300,000 to 1,000,000 shots
Design Software: UG,PRO-E,AUTO-CAD, Cimmtron
Process Machine:CNC, High Speed Carve, EDM, Wire Cut, Flying cutter,Drill etc
| specification | unit | JK1800 | ||
| A | B | C | ||
| Injectionunit | ||||
| screw diameter | mm | 45 | 50 | 55 |
| screw l/d ratio | L/D | 20 | 18 | 16.3 |
| shot size(theoretical) | cm | 334 | 412 | 499 |
| injection weight | g | 301 | 372 | 449 |
| injection rate | g/s | 120 | 148 | 179 |
| plasticizing capacity | g/s | 23.5 | 25 | 28 |
| injection pressure | mpa | 207 | 168 | 138 |
| screw speed | rpm | 180 | 180 | 180 |
| clamping unit | ||||
| clamping force | kn | 1800 | 1800 | 1800 |
| toggle stroke | mm | 440 | 440 | 440 |
| space between tie-bars | mm | 480*460 | 480*460 | 480*460 |
| max.mould height | mm | 450 | 450 | 450 |
| min.mould height | mm | 200 | 200 | 200 |
| ejector stroke | mm | 100 | 100 | 100 |
| ejector tonnage | kn | 70 | 70 | 70 |
| others | ||||
| max.pump pressure | mpa | 16 | 16 | 16 |
| pump motor power | kw | 18.5 | 18.5 | 18.5 |
| heating power | kw | 8 | 8 | 8 |
| machine dimensions(L*W*H) | m | 5.1*1.5*2 | 5.1*1.5*2 | 5.1*1.5*2 |
| machine weight(approximate) | t | 5 | 5 | 5 |
recycling plastic machine
